Mechanical Parts

mechanical-parts

O Ring

o-ring

Oil Seals

oil-seals

Terminal Blocks

terminal-blocks

Standard Terminal Block

standard-terminal-block

The O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.

The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.

 Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures. 

<h3 class="md-block-header-three">NBR Oring Cord 5mm X 10Mtr</h3>O-Ring Replacement Cord - NBRThe O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.<h3 class="md-block-header-three">Features and Benefits:</h3><ul class="md-block-unordered-list-item"><li>Can be used in O-Ring kits</li><li>Available in various diameters</li></ul><h3 class="md-block-header-three">Product Application Information:</h3><ul class="md-block-unordered-list-item"><li>The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.</li></ul><h3 class="md-block-header-three">Specifications:</h3>Attribute ValueMaterial FKM FluoroelastomersDiameter 3 mm Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.

<h3>NBR Oring Cord 5mm X 10Mtr</h3>
O-Ring Replacement Cord - NBR
The O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.
<h3>Features and Benefits:</h3>
<ul>
<li>Can be used in O-Ring kits</li>
<li>Available in various diameters</li>
</ul>
<h3>Product Application Information:</h3>
<ul>
<li>The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.</li>
</ul>
<h3>Specifications:</h3>
Attribute Value
Material FKM Fluoroelastomers
Diameter 3 mm
&nbsp;Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.&nbsp;

ID - Yong Leng Trading ETH Account

RJ LONDON PAINT

Air Dehumidifiers

buyerIntroduction

Nbr Oring Cord 5mm X 10Mtr

nbr oring cord 5mm 10mtr kabel ring o-ring oem gelang oem/oem代工 oring绳5mm o型圈 oem代工

nbr-oring-cord-5mm-x-10mtr

Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).  It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.

Temperature RangeLow : -22`F / -30`C High: 212`F / 100`C

Overview on Application Rating for Material Nitrile (NBR)  

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.  Primary UsageO-Rings and rubber seals are generally used for:

Applications that require resistance to OIL 

Applications that are required to work in low temperatures (-0°C) 

High performance Fuel systems that requires strictly no leakage

Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:

Covering and lubricating the threading of the shaft 

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING ID 120mm x CS 5mm (120 x 5)Material : Nitrile (NBR) 72 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Primary UsageO-Rings and rubber seals are generally used for:<ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL </li><li>Applications that are required to work in low temperatures (-0°C) </li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts </li><li>Marine Ships </li><li>F1 Cars</li></ul><li>General Industrial Use </li></ul>Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:<ul class="md-block-unordered-list-item"><li>Covering and lubricating the threading of the shaft </li></ul>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.<ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners </li></ul>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.<ul class="md-block-unordered-list-item"><li>Even stretching </li></ul>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.<ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft </li></ul>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.<ul class="md-block-unordered-list-item"><li>Finishing it off </li></ul>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING&nbsp;
ID 120mm x CS 5mm (120 x 5)
Material : Nitrile (NBR) 72 Shore&nbsp;&nbsp;&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>&nbsp;
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. <ins>Primary Usage</ins>O-Rings and rubber seals are generally used for:
<ul>
<li>Applications that require resistance to OIL&nbsp;</li>
<li>Applications that are required to work in low temperatures (-0°C)&nbsp;</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts&nbsp;</li>
<li>Marine Ships&nbsp;</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use&nbsp;&nbsp;&nbsp;</li>
</ul>
<ins>Tips for installation of an O-ring</ins>O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.<ins>So how do you install an O-ring?</ins>The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:
<ul>
<li>Covering and lubricating the threading of the shaft&nbsp;</li>
</ul>
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
<ul>
<li>Don’t force it over sharp corners&nbsp;</li>
</ul>
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
<ul>
<li>Even stretching&nbsp;</li>
</ul>
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
<ul>
<li>Don’t roll it down the shaft&nbsp;</li>
</ul>
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
<ul>
<li>Finishing it off&nbsp;</li>
</ul>
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

KOYO

Others

Enerpac

Triangle

Optibelt

Nachi

Roller Bearing

Hydraulic Seals

Ball Bearings

Linear Bearing

Plain Bearings

Cam Follower Bearings

Other Tools

V Rings

Oring ID120mm X CS5mm (120 X 5) Nbr 72 Shore

oring id120mm cs5mm (120 5) nbr 72 shore ring o-ring oem gelang oem/oem代工 cs5mm（120 5）nbr 72肖氏 o型圈 oem代工

oring-id120mm-x-cs5mm-120-x-5-nbr-72-shore

OIL SEAL NBR 10 X 19 X 4,5 MM (10 X 20 X 5)

 Picture shown is for illustration purposes only, actual product may differ 

<h3 class="md-block-header-three">OIL SEAL NBR 10 X 19 X 4,5 MM (10 X 20 X 5)</h3> Picture shown is for illustration purposes only, actual product may differ

<h3>OIL SEAL NBR 10 X 19 X 4,5 MM (10 X 20 X 5)</h3>
 Picture shown is for illustration purposes only, actual product may differ

Nadaa Kautsar

Facom

ELORA

Pferd

STANLEY

JOYKO

WHOLESAFETY

Building Materials

Drill Bits & Drill Bit Sets

Office Supplies

Filing and Storage

Kitchen Utensils

Safety Gloves

Screwdrivers

Other Measuring Tools

Copier Paper

Ink Cartridge, Drums & Toners

Oil Seal Nbr 10 X 19 X 4.5 Mm (10 X 20 X 5)

oil seal nbr 10 19 4.5 mm (10 20 5) seals segel minyak oem kedap pengedap oem/oem代工 油封丁腈橡胶 毫米 油密封用品 oem代工

oil-seal-nbr-10-x-19-x-4-5-mm-10-x-20-x-5

          KABEL   NYAF 1.5 MM RED Ket : SUPREME    

     KABEL   NYAF 1.5 MM BLACK Ket : SUPREME    

     KABEL   NYAF 1.5 MM BLUE Ket : SUPREME    

     KABEL   NYAF 1.5 MM YELLOW Ket : SUPREME    

     FLEXIBLE   CONDUIT METAL ID 17 MM OD 20 MM     

     TEE   METAL CONDUIT JB 3 WAY OD 20 MM    

     MALE   FLEXIBLE CONDUIT CONNECTOR OD 20 MM    

     CLAMP   BEAM ( CLAMP BUAYA 20 MM )      

          O RING   SEAL DIA 5 MM ID 280 MM OD 290 MM NBR    

<h3 class="md-block-header-three">Bulk Order Shell Mtn December 2023</h3>First Batch<ul class="md-block-unordered-list-item"><li> KABEL NYAF 1.5 MM RED Ket : SUPREME </li><li> KABEL NYAF 1.5 MM BLACK Ket : SUPREME </li><li> KABEL NYAF 1.5 MM BLUE Ket : SUPREME </li><li> KABEL NYAF 1.5 MM YELLOW Ket : SUPREME </li><li> FLEXIBLE CONDUIT METAL ID 17 MM OD 20 MM </li><li> TEE METAL CONDUIT JB 3 WAY OD 20 MM </li><li> CONDUIT FITTING OD 20 MM </li><li> MALE FLEXIBLE CONDUIT CONNECTOR OD 20 MM </li><li> CLAMP BEAM ( CLAMP BUAYA 20 MM ) </li></ul>Second Batch<ul class="md-block-unordered-list-item"><li> O RING SEAL DIA 5 MM ID 280 MM OD 290 MM NBR </li></ul>

<h3>Bulk Order Shell Mtn December 2023</h3>
First Batch
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;KABEL NYAF 1.5 MM RED Ket : SUPREME&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;KABEL NYAF 1.5 MM BLACK Ket : SUPREME&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;KABEL NYAF 1.5 MM BLUE Ket : SUPREME&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;KABEL NYAF 1.5 MM YELLOW Ket : SUPREME&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;FLEXIBLE CONDUIT METAL ID 17 MM OD 20 MM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;TEE METAL CONDUIT JB 3 WAY OD 20 MM&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;CONDUIT FITTING OD 20 MM&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;MALE FLEXIBLE CONDUIT CONNECTOR OD 20 MM&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;CLAMP BEAM ( CLAMP BUAYA 20 MM )&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li>
</ul>
Second Batch
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;O RING SEAL DIA 5 MM ID 280 MM OD 290 MM NBR&nbsp;&nbsp;&nbsp;&nbsp;</li>
</ul>