ELORA

Mechanical Parts

mechanical-parts

O Ring

o-ring

Screwdrivers & Screw Extractors

screwdrivers-screw-extractors

Screwdriver Sets

screwdriver-sets

Screwdrivers

screwdrivers

Kennedy

FORCE

Iwata

WIHA

MAKITA

FLUKE

Logitech

Enerpac

Fluke Networks

Impact Sockets

IT Accessories

Screwdriver Bits & Bit Set

Ring Spanners

Sockets

Hex Keys & Sets

Open End Spanners

Painting Tools

Ball Bearings

Stefy

Elora Electricians Screwdriver 649-IS 75

elora electricians screwdriver 649-is 75 obeng screwdrivers pemutar skru 电工螺丝刀 螺丝起子 埃洛拉

elora-electricians-screwdriver-649-is-75

Elora 649-IS 60 Plain Slot 0.4×2.5 Electricians Screwdriver

Description:- For plain slotted screws
matt chrome plated forged blade
through hardened
blade edge gun metal finish
nonslip QUATROLIT®-2C-handle
with suspension hole
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1

Elora 649-IS 75 Plain Slot 0.5×3.0 Electricians Screwdriver

Elora 649-IS 100 Plain Slot 0.6×3.5 Electricians Screwdriver

Elora 649-IS 108 Plain Slot 0.8×4.0 Electricians Screwdriver

Elora 649-IS 125 Plain Slot 1.0×5.5 Electricians Screwdriver

Elora 649-IS 150 Plain Slot 1.0×5.5 Electricians Screwdriver

Elora 649-IS 175 Plain Slot 1.0×5.5 Electricians Screwdriver

Elora 649-IS 200 Plain Slot 1.0×5.5 Electricians Screwdriver

Elora 649-IS 4.5×300 Plain Slot 0.8×4.5 Electricians Screwdriver

Elora 649-IS 6.0×300 Plain Slot 1.0×6.0 Electricians Screwdriver

<h3 class="md-block-header-three">Elora 649-IS 60 Plain Slot 0.4×2.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649020605500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,4 Î 2,5</li><li>Blade Length mm:- 60</li><li>Blade plus Handle mm:- 135</li><li>Weight g:- 30</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 75 Plain Slot 0.5×3.0 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649020755500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,5 Î 3,0</li><li>Blade Length mm:- 75</li><li>Blade plus Handle mm:- 160</li><li>Weight g:- 32</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 100 Plain Slot 0.6×3.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021005500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,6 Î 3,5</li><li>Blade Length mm:- 100</li><li>Blade plus Handle mm:- 185</li><li>Weight g:- 36</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 108 Plain Slot 0.8×4.0 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021085500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,8 Î 4,0</li><li>Blade Length mm:- 100</li><li>Blade plus Handle mm:- 185</li><li>Weight g:- 40</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 125 Plain Slot 1.0×5.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021255500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 5,5</li><li>Blade Length mm:- 125</li><li>Blade plus Handle mm:- 210</li><li>Weight g:- 60</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 150 Plain Slot 1.0×5.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021505500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 5,5</li><li>Blade Length mm:- 150</li><li>Blade plus Handle mm:- 235</li><li>Weight g:- 66</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 175 Plain Slot 1.0×5.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021755500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 5,5</li><li>Blade Length mm:- 175</li><li>Blade plus Handle mm:- 260</li><li>Weight g:- 70</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 200 Plain Slot 1.0×5.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649022005500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 5,5</li><li>Blade Length mm:- 200</li><li>Blade plus Handle mm:- 295</li><li>Weight g:- 84</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 4.5×300 Plain Slot 0.8×4.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649023005500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,8 Î 4,5</li><li>Blade Length mm:- 300</li><li>Blade plus Handle mm:- 385</li><li>Weight g:- 70</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 6.0×300 Plain Slot 1.0×6.0 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649023005501 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 6,0</li><li>Blade Length mm:- 300</li><li>Blade plus Handle mm:- 395</li><li>Weight g:- 114</li><li>Product details:- see PDF-Data sheet</li></ul>

<h3>Elora 649-IS 60 Plain Slot 0.4×2.5 Electricians Screwdriver</h3>
<h3>Product code: 649020605500 </h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,4 Î 2,5</li>
<li>Blade Length mm:- 60</li>
<li>Blade plus Handle mm:- 135</li>
<li>Weight g:- 30</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 75 Plain Slot 0.5×3.0 Electricians Screwdriver</h3>
<h3>Product code: 649020755500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,5 Î 3,0</li>
<li>Blade Length mm:- 75</li>
<li>Blade plus Handle mm:- 160</li>
<li>Weight g:- 32</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 100 Plain Slot 0.6×3.5 Electricians Screwdriver</h3>
<h3>Product code: 649021005500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,6 Î 3,5</li>
<li>Blade Length mm:- 100</li>
<li>Blade plus Handle mm:- 185</li>
<li>Weight g:- 36</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 108 Plain Slot 0.8×4.0 Electricians Screwdriver</h3>
<h3>Product code: 649021085500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,8 Î 4,0</li>
<li>Blade Length mm:- 100</li>
<li>Blade plus Handle mm:- 185</li>
<li>Weight g:- 40</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 125 Plain Slot 1.0×5.5 Electricians Screwdriver</h3>
<h3>Product code: 649021255500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 5,5</li>
<li>Blade Length mm:- 125</li>
<li>Blade plus Handle mm:- 210</li>
<li>Weight g:- 60</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 150 Plain Slot 1.0×5.5 Electricians Screwdriver</h3>
<h3>Product code: 649021505500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 5,5</li>
<li>Blade Length mm:- 150</li>
<li>Blade plus Handle mm:- 235</li>
<li>Weight g:- 66</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 175 Plain Slot 1.0×5.5 Electricians Screwdriver</h3>
<h3>Product code: 649021755500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 5,5</li>
<li>Blade Length mm:- 175</li>
<li>Blade plus Handle mm:- 260</li>
<li>Weight g:- 70</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 200 Plain Slot 1.0×5.5 Electricians Screwdriver</h3>
<h3>Product code: 649022005500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 5,5</li>
<li>Blade Length mm:- 200</li>
<li>Blade plus Handle mm:- 295</li>
<li>Weight g:- 84</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 4.5×300 Plain Slot 0.8×4.5 Electricians Screwdriver</h3>
<h3>Product code: 649023005500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,8 Î 4,5</li>
<li>Blade Length mm:- 300</li>
<li>Blade plus Handle mm:- 385</li>
<li>Weight g:- 70</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 6.0×300 Plain Slot 1.0×6.0 Electricians Screwdriver</h3>
<h3>Product code: 649023005501&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 6,0</li>
<li>Blade Length mm:- 300</li>
<li>Blade plus Handle mm:- 395</li>
<li>Weight g:- 114</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>

Elora 649-IS Plain Slot Electricians Screwdriver

elora 649-is plain slot electricians screwdriver obeng listrik biasa screwdrivers pemutar skru elektrik elora/埃洛拉 649-is平槽电工螺丝刀 螺丝起子 埃洛拉

elora-649-is-plain-slot-electricians-screwdriver

Sizes

Elora OMS-6 10pc. Quatrolit® 2c-Screwdriver-Set

Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

Contents:- QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 539-IS 90, 100, 125, 150, 649-IS 75
QUATROLIT®-2 Component Screwdriver for cross slotted Screws
559-PH 1, 2, 3
Chubby Screwdriver for plain slotted Screws
543-IS 60
Chubby Screwdriver for cross slotted Screws
555-PH 2

Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT black, with yellow signal colour oil and grease resistant chemical resistant Width: 41,5 cm, Depth: 18,9 cm hard foam insert

<h3 class="md-block-header-three">Elora OMS-6 10pc. Quatrolit® 2c-Screwdriver-Set</h3><h3 class="md-block-header-three">Product code: 410601000</h3><ul class="md-block-unordered-list-item"><li>Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT black, with yellow signal colour oil and grease resistant chemical resistant Width: 41,5 cm, Depth: 18,9 cm hard foam insert</li><li>Contents:- QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 539-IS 90, 100, 125, 150, 649-IS 75 QUATROLIT®-2 Component Screwdriver for cross slotted Screws 559-PH 1, 2, 3 Chubby Screwdriver for plain slotted Screws 543-IS 60 Chubby Screwdriver for cross slotted Screws 555-PH 2</li><li>Weight g:- 900</li></ul> <h3 class="md-block-header-three">Elora OMS-6.7.36 and 37 Empty Module</h3><h3 class="md-block-header-three">Product code: 410607000</h3><ul class="md-block-unordered-list-item"><li>Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT black, with yellow signal colour oil and grease resistant chemical resistant Width: 41,5 cm, Depth: 18,9 cm hard foam insert</li><li>Contents:- empty Module</li><li>Weight g:- 80</li></ul>

<h3>Elora OMS-6 10pc. Quatrolit® 2c-Screwdriver-Set</h3>
<h3>Product code: 410601000</h3>
<ul>
<li>Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT 
black, with yellow signal colour 
oil and grease resistant 
chemical resistant 
Width: 41,5 cm, Depth: 18,9 cm 
hard foam insert</li>
<li>Contents:- QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 539-IS 90, 100, 125, 150, 649-IS 75 
QUATROLIT®-2 Component Screwdriver for cross slotted Screws 
559-PH 1, 2, 3 
Chubby Screwdriver for plain slotted Screws 
543-IS 60 
Chubby Screwdriver for cross slotted Screws 
555-PH 2</li>
<li>Weight g:- 900</li>
</ul>
&nbsp;
<h3>Elora OMS-6.7.36 and 37 Empty Module</h3>
<h3>Product code: 410607000</h3>
<ul>
<li>Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT black, with yellow signal colour oil and grease resistant chemical resistant Width: 41,5 cm, Depth: 18,9 cm hard foam insert</li>
<li>Contents:- empty Module</li>
<li>Weight g:- 80</li>
</ul>

elora oms-6 10pc. quatrolit® 2c-screwdriver-set 2c-obeng-set screwdriver sets set obeng 2c-screwdriver pemutar skru elora/埃洛拉 10个。 quatrolit®2c螺丝刀套件 螺丝刀组 埃洛拉

elora-oms-6-10pc-quatrolit-2c-screwdriver-set

Elora OMS-6.7.36 and 37 Empty Module

Elora Module-QUATROLIT®-2C-Screwdrivers OMS-6 

Contents:
QUATROLIT®-2 Component Screwdrivers for plain slotted Screws
539-IS 90 (0,8x4,0) | 100 (1,0x5,5) | 125 (1,2x6,5) | 150 (1,2x8,0) | 649-IS 75 (0,5x3,0)
QUATROLIT®-2 Component Screwdriver for cross slotted Screws
559-PH 1, 2, 3
Chubby Screwdriver for plain slotted Screws
543-IS 60 (1,0x5,5)
Chubby Screwdriver for cross slotted Screws
555-PH 2 

<h3 class="md-block-header-three">Elora Module-QUATROLIT®-2C-Screwdrivers OMS-6 </h3><ul class="md-block-unordered-list-item"><li>for ELORA-roller tool cabinets</li><li>black, with yellow signal colour</li><li>oil and grease resistant</li><li>chemical resistant</li><li>Width: 41,5 cm, Depth: 18,9 cm</li><li>hard foam insert </li><li>Contents: QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 539-IS 90 (0,8x4,0) | 100 (1,0x5,5) | 125 (1,2x6,5) | 150 (1,2x8,0) | 649-IS 75 (0,5x3,0) QUATROLIT®-2 Component Screwdriver for cross slotted Screws 559-PH 1, 2, 3 Chubby Screwdriver for plain slotted Screws 543-IS 60 (1,0x5,5) Chubby Screwdriver for cross slotted Screws 555-PH 2 </li></ul>

<h3>Elora Module-QUATROLIT®-2C-Screwdrivers OMS-6&nbsp;</h3>
<ul>
<li>for ELORA-roller tool cabinets</li>
<li>black, with yellow signal colour</li>
<li>oil and grease resistant</li>
<li>chemical resistant</li>
<li>Width: 41,5 cm, Depth: 18,9 cm</li>
<li>hard foam insert&nbsp;</li>
<li>Contents: 
QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 
539-IS 90 (0,8x4,0) | 100 (1,0x5,5) | 125 (1,2x6,5) | 150 (1,2x8,0) | 649-IS 75 (0,5x3,0) 
QUATROLIT®-2 Component Screwdriver for cross slotted Screws 
559-PH 1, 2, 3 
Chubby Screwdriver for plain slotted Screws 
543-IS 60 (1,0x5,5) 
Chubby Screwdriver for cross slotted Screws 
555-PH 2&nbsp;</li>
</ul>

Elora Module-QUATROLIT®-2C-Screwdrivers OMS-6

elora module-quatrolit®-2c-screwdrivers oms-6 module-quatrolit®-2c-obeng screwdriver sets set obeng modul elora-quatrolit®-2c-pemutar skru pemutar elora/埃洛拉 模块-quatrolit®-2c-螺丝刀 螺丝刀组 埃洛拉

elora-module-quatrolit-2c-screwdrivers-oms-6

Elora Screwdriver 545-IS 75

elora screwdriver 545-is 75 obeng screwdrivers pemutar skru 螺丝刀 螺丝起子 埃洛拉

elora-screwdriver-545-is-75

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS914 ID 25.04 X CS 2.95Material : Nitrile (NBR) 70 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/oMCCnwvI8_QZPv56GGHC5~.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS914
&nbsp;ID 25.04 X CS 2.95
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:44afd"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/oMCCnwvI8_QZPv56GGHC5~.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="44afd" 
 layout="nodisplay"></amp-image-lightbox>

ID - Yong Leng Trading ETH Account

KOYO

Others

Triangle

Optibelt

Nachi

Roller Bearing

Hydraulic Seals

Linear Bearing

Plain Bearings

Cam Follower Bearings

Other Tools

V Rings

buyerIntroduction

Oring AS568 AS914 Id 26.54 X Cs 2.95 Nitrile (nbr) 70 Shore

oring as568 as914 id 26.54 cs 2.95 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 2.95腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as914-id-26-54-x-cs-2-95-nitrile-nbr-70-shore

Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore    

Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.

EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51`C to 149`C) and it has good retention of compression.

In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance. 

The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.

Overview on Application Rating for Material Silicone 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.

ORING AS568 AS420 ID 97.79 X CS 6.99Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore Additional InformationEthylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51&#x60;C to 149&#x60;C) and it has good retention of compression.In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance. The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.Temperature Range (Dry Heat)Low: -60&#x60;F / -51&#x60;C High: 300&#x60;F / 149&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Petroleum Oils / Fuels - PoorSteam Up to 399&#x60;F– ExcellentGas Impermeability - GoodCompressiom - GoodAbrasion Resistance - GoodOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/cuO86mJu1n2m46wXX2yjFs.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS420
&nbsp;ID 97.79 X CS 6.99
Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.
EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51`C to 149`C) and it has good retention of compression.
In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance.&nbsp;
The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.
<ins>Temperature Range (Dry Heat)</ins>
Low: -60`F / -51`C High: 300`F / 149`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Petroleum Oils / Fuels - Poor
Steam Up to 399`F– Excellent
Gas Impermeability - Good
Compressiom - Good
Abrasion Resistance - Good
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:afe0v"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/cuO86mJu1n2m46wXX2yjFs.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="afe0v" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS420 ID 97.79 X CS 6.99 Ethylene Propylene Diene Monomer (EPDM) 70 Shore

oring as568 as420 id 97.79 cs 6.99 ethylene propylene diene monomer (epdm) 70 shore ring o-ring oem gelang oem/oem代工 6.99乙烯丙烯二烯单体（epdm）70肖氏 o型圈 oem代工

oring-as568-as420-id-97-79-x-cs-6-99-ethylene-propylene-diene-monomer-epdm-70-shore

ORING AS568 AS401 ID 37.47 X CS 6.99Material : Nitrile (NBR) 90 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/aXSy148~iYy5yKMGOqGCl3.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS401
&nbsp;ID 37.47 X CS 6.99
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:3qfh"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/aXSy148~iYy5yKMGOqGCl3.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="3qfh" 
 layout="nodisplay"></amp-image-lightbox>