ELORA

FORCE

MAKITA

MITUTOYO

Moxa

Post-it

Wagner

Power Tools

power-tools

Grinders

grinders

IT & Electronics

it-electronics

Network Switches

network-switches

Mechanical Parts

mechanical-parts

O Ring

o-ring

Office & School Consumables

office-school-consumables

Office Supplies

office-supplies

Test & Measurement

test-measurement

Other Measuring Tools

other-measuring-tools

Other Hand Tools

other-hand-tools

Other Tools

other-tools

Plumbing & Sanitary

plumbing-sanitary

Plumbing Tools & Equipment

plumbing-tools-equipment

Spanners & Sockets

spanners-sockets

Socket Sets

socket-sets

Outdoor & Gardening

outdoor-gardening

Sprayers

sprayers

Expanding steps Ø (mm): 10/12, 13/15, 16/18, 20/22, 25/28 

<h3 class="md-block-header-three">Elora Step Arbor 408 </h3><ul class="md-block-unordered-list-item"><li>for expanding copper tubes</li><li>black, made of special steel</li><li>Length (mm): 290 </li><li>Expanding steps Ø (mm): 10/12, 13/15, 16/18, 20/22, 25/28 </li></ul>

<h3>Elora Step Arbor 408&nbsp;</h3>
<ul>
<li>for expanding copper tubes</li>
<li>black, made of special steel</li>
<li>Length (mm): 290&nbsp;</li>
<li>Expanding steps Ø (mm): 10/12, 13/15, 16/18, 20/22, 25/28&nbsp;</li>
</ul>

Kennedy

Iwata

WIHA

FLUKE

Logitech

Enerpac

Fluke Networks

Impact Sockets

IT Accessories

Screwdriver Bits & Bit Set

Screwdrivers

Ring Spanners

Sockets

Hex Keys & Sets

Open End Spanners

Painting Tools

Ball Bearings

Stefy

Elora Step Arbor 408

elora step arbor 408 tangga tools alat lainnya alatan lain elora/埃洛拉 阶梯式轴架 其他工具 埃洛拉

elora-step-arbor-408

Description:- For expanding copper tubes
black, made of special steel

Expanding steps mm:- 10/12, 13/15, 16/18, 20/22, 25/28

<h3 class="md-block-header-three">Elora 408 Step Arbor</h3><h3 class="md-block-header-three">Product code: 408000000000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For expanding copper tubes black, made of special steel</li><li>Length mm:- 940</li><li>Expanding steps mm:- 10/12, 13/15, 16/18, 20/22, 25/28</li><li>Weight g:- 1013</li></ul>

<h3>Elora 408 Step Arbor</h3>
<h3>Product code: 408000000000 </h3>
<ul>
<li>Description:- For expanding copper tubes 
black, made of special steel</li>
<li>Length mm:- 940</li>
<li>Expanding steps mm:- 10/12, 13/15, 16/18, 20/22, 25/28</li>
<li>Weight g:- 1013</li>
</ul>

Elora 408 Step Arbor

elora 408 step arbor plumbing tools equipment alat perlengkapan pipa peralatan paip elora/埃洛拉 卫生工具及设备 埃洛拉

elora-408-step-arbor

Force 50121C-408 3-layer Socket Display Shelf With 408pcs Tools (sae) (1/4", 1/2" Sockets)

<h3 class="md-block-header-three">Force 50121C-408 3-layer Socket Display Shelf With 408pcs Tools (sae) (1/4&quot;, 1/2&quot; Sockets)</h3><ul class="md-block-unordered-list-item"><li>Display</li><li>1/4&#x27;&#x27; &amp; 1/2&#x27;&#x27; Sockets</li><li>SAE</li><li>408 pieces</li></ul>Contents:<ul class="md-block-unordered-list-item"><li>10x 1/4&#x27;&#x27; 6-sided socket 5/32&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 3/16&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 7/32&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 1/4&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 9/32&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 5/16&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 11/32&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 3/8&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 13/32&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 7/16&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 15/32&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 1/2&#x27;&#x27;</li><li>10x 1/4&#x27;&#x27; 6-sided socket 9/16&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 1/4&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 5/16&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 3/8&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 7/16&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 15/32&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 1/2&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 9/16&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 19/32&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 5/8&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 11/16&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 3/4&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 25/32&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 13/16&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 7/8&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket 15/16&#x27;&#x27;</li><li>9x 1/2&#x27;&#x27; 6-sided socket 1&#x27;&#x27;</li><li>9x 1/2&#x27;&#x27; 6-sided socket 1-1/16&#x27;&#x27;</li><li>8x 1/2&#x27;&#x27; 6-sided socket 1-1/8&#x27;&#x27;</li><li>8x 1/2&#x27;&#x27; 6-sided socket 1-3/16&#x27;&#x27;</li><li>8x 1/2&#x27;&#x27; 6-sided socket 1-1/4&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket long 3/8&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket long 1/2&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket long 9/16&#x27;&#x27;</li><li>10x 1/2&#x27;&#x27; 6-sided socket long 5/8&#x27;&#x27;</li><li>9x 1/2&#x27;&#x27; 6-sided socket long 11/16&#x27;&#x27;</li><li>8x 1/2&#x27;&#x27; 6-sided socket long 3/4&#x27;&#x27;</li><li>8x 1/2&#x27;&#x27; 6-sided socket long 13/16&#x27;&#x27;</li><li>7x 1/2&#x27;&#x27; 6-sided socket long 7/8&#x27;&#x27;</li><li>7x 1/2&#x27;&#x27; 6-sided socket long 15/16&#x27;&#x27;</li><li>7x 1/2&#x27;&#x27; 6-sided socket long 1&#x27;&#x27;</li></ul>

<h3>Force 50121C-408 3-layer Socket Display Shelf With 408pcs Tools (sae) (1/4", 1/2" Sockets)</h3>
<ul>
<li>Display</li>
<li>1/4'' &amp; 1/2'' Sockets</li>
<li>SAE</li>
<li>408 pieces</li>
</ul>
Contents:
<ul>
<li>10x 1/4'' 6-sided socket 5/32''</li>
<li>10x 1/4'' 6-sided socket 3/16''</li>
<li>10x 1/4'' 6-sided socket 7/32''</li>
<li>10x 1/4'' 6-sided socket 1/4''</li>
<li>10x 1/4'' 6-sided socket 9/32''</li>
<li>10x 1/4'' 6-sided socket 5/16''</li>
<li>10x 1/4'' 6-sided socket 11/32''</li>
<li>10x 1/4'' 6-sided socket 3/8''</li>
<li>10x 1/4'' 6-sided socket 13/32''</li>
<li>10x 1/4'' 6-sided socket 7/16''</li>
<li>10x 1/4'' 6-sided socket 15/32''</li>
<li>10x 1/4'' 6-sided socket 1/2''</li>
<li>10x 1/4'' 6-sided socket 9/16''</li>
<li>10x 1/2'' 6-sided socket 1/4''</li>
<li>10x 1/2'' 6-sided socket 5/16''</li>
<li>10x 1/2'' 6-sided socket 3/8''</li>
<li>10x 1/2'' 6-sided socket 7/16''</li>
<li>10x 1/2'' 6-sided socket 15/32''</li>
<li>10x 1/2'' 6-sided socket 1/2''</li>
<li>10x 1/2'' 6-sided socket 9/16''</li>
<li>10x 1/2'' 6-sided socket 19/32''</li>
<li>10x 1/2'' 6-sided socket 5/8''</li>
<li>10x 1/2'' 6-sided socket 11/16''</li>
<li>10x 1/2'' 6-sided socket 3/4''</li>
<li>10x 1/2'' 6-sided socket 25/32''</li>
<li>10x 1/2'' 6-sided socket 13/16''</li>
<li>10x 1/2'' 6-sided socket 7/8''</li>
<li>10x 1/2'' 6-sided socket 15/16''</li>
<li>9x 1/2'' 6-sided socket 1''</li>
<li>9x 1/2'' 6-sided socket 1-1/16''</li>
<li>8x 1/2'' 6-sided socket 1-1/8''</li>
<li>8x 1/2'' 6-sided socket 1-3/16''</li>
<li>8x 1/2'' 6-sided socket 1-1/4''</li>
<li>10x 1/2'' 6-sided socket long 3/8''</li>
<li>10x 1/2'' 6-sided socket long 1/2''</li>
<li>10x 1/2'' 6-sided socket long 9/16''</li>
<li>10x 1/2'' 6-sided socket long 5/8''</li>
<li>9x 1/2'' 6-sided socket long 11/16''</li>
<li>8x 1/2'' 6-sided socket long 3/4''</li>
<li>8x 1/2'' 6-sided socket long 13/16''</li>
<li>7x 1/2'' 6-sided socket long 7/8''</li>
<li>7x 1/2'' 6-sided socket long 15/16''</li>
<li>7x 1/2'' 6-sided socket long 1''</li>
</ul>

force 50121c-408 3-layer socket display shelf 408pcs tools (sae) (1/4", 1/2" sockets) rak soket lapis dengan 408 buah alat (soket 1/4", 1/2") sets set paparan lapisan soket) force/力量 层套筒展示架，配 件工具 (sae)（1/4 英寸、1/2 英寸套筒） 套筒组 力量

force-50121c-408-3-layer-socket-display-shelf-with-408pcs-tools-sae-1-4-1-2-sockets

<h3 class="md-block-header-three">WAGNER TRADETIP3 Nozzle 408 554408</h3> Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight : 0.300 KG</li><li>Unit Demension : 5 X 3 X 4 CM</li><li>Height Demension : 4.000</li><li>Length Demension : 5.000</li><li>Width Demension : 3.000</li><li>Dimension uom : 5.000 </li></ul>

<h3>WAGNER TRADETIP3 Nozzle 408 554408</h3>
&nbsp;Technical Spec
<ul>
<li>Netto Weight : 0.300 KG</li>
<li>Unit Demension : 5 X 3 X 4 CM</li>
<li>Height Demension : 4.000</li>
<li>Length Demension : 5.000</li>
<li>Width Demension : 3.000</li>
<li>Dimension uom : 5.000&nbsp;</li>
</ul>

Facom

Pferd

METABO

BRADY

FUJI Tools

NILFISK

TOKU

Drill Bits & Drill Bit Sets

Grinding Abrasives

Power Tools Accessories

Weight, Force & Pressure Gauges

Tap & Die Wrenches

Automotive Equipment

Drills, Impact Drivers & Wrenches

PT Kawan Lama Sejahtera ETH Account

buyerIntroduction

Wagner TRADETIP3 Nozzle 408 554408

wagner tradetip3 nozzle 408 554408 sprayers penyemprot muncung penyembur wagner/瓦格纳 喷嘴 喷雾器 瓦格纳

wagner-tradetip3-nozzle-408-554408

MITUTOYO Od Micrometer 1000-1100/0.01MM 105-408

Bow-type Micrometer for measurement of large outsidedimensions 

Vernier scale in metric units for taking precise outside diameter (OD) measurements 

Extension anvil collar for adjustablezero-setting < li> Ratchet-stop mechanism helps provide uniform pressurefor precise, repeatable measurements

Carbide facing on spindle andanvil prov ides wear resistance

Manufacturer Series Num ber : OutsideMicrometer 

<h3 class="md-block-header-three">MITUTOYO Od Micrometer 1000-1100/0.01MM 105-408</h3> Features<ul class="md-block-unordered-list-item"><li>Bow-type Micrometer for measurement of large outsidedimensions </li><li>Vernier scale in metric units for taking precise outside diameter (OD) measurements </li><li>Extension anvil collar for adjustablezero-setting &lt; li&gt; Ratchet-stop mechanism helps provide uniform pressurefor precise, repeatable measurements </li><li>Carbide facing on spindle andanvil prov ides wear resistance</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Gradient Spacing : 0.01 MM </li><li>Maximum Measurement :1000-1100mm </li><li>Measurement Accuracy : +/-0.0207mm </li><li>Number of Items : 1 </li><li>Part Number : 105-408 </li><li>Range : 1000-1100mm </li><li>Resolution : 0.01mm </li><li>Size Name : 1000-1100mm </li><li>Style Name : Vernier </li><li>Brand Name : Mitutoyo </li><li>Manufacturer Series Num ber : OutsideMicrometer </li><li>Material Type : Carbide </li><li>System o f Measurement :Metric </li></ul>Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight: 10.490 KG</li><li>Unit Demension: 1470 X 915 X 150 MM</li><li>Height Demension: 15.000</li><li>Length Demension :147.000</li><li>Width Demension: 91.500</li><li>Material: Carbide</li><li>Type: Outside Micrometer</li><li>Dimension uom: 147.000</li></ul>

<h3>MITUTOYO Od Micrometer 1000-1100/0.01MM 105-408</h3>
 Features
<ul>
<li>Bow-type Micrometer for measurement of large outsidedimensions&nbsp;</li>
<li>Vernier scale in metric units for taking precise outside diameter (OD) measurements&nbsp;</li>
<li>Extension anvil collar for adjustablezero-setting &lt; li&gt; Ratchet-stop mechanism helps provide uniform pressurefor precise, repeatable measurements&nbsp;</li>
<li>Carbide facing on spindle andanvil prov ides wear resistance</li>
</ul>
Specifications
<ul>
<li>Gradient Spacing : 0.01 MM&nbsp;</li>
<li>Maximum Measurement :1000-1100mm&nbsp;</li>
<li>Measurement Accuracy : +/-0.0207mm&nbsp;</li>
<li>Number of Items : 1&nbsp;</li>
<li>Part Number : 105-408&nbsp;</li>
<li>Range : 1000-1100mm&nbsp;</li>
<li>Resolution : 0.01mm&nbsp;</li>
<li>Size Name : 1000-1100mm&nbsp;</li>
<li>Style Name : Vernier&nbsp;</li>
<li>Brand Name : Mitutoyo&nbsp;</li>
<li>Manufacturer Series Num ber : OutsideMicrometer&nbsp;</li>
<li>Material Type : Carbide&nbsp;</li>
<li>System o f Measurement :Metric&nbsp;&nbsp;</li>
</ul>
Technical Spec
<ul>
<li>Netto Weight: 10.490 KG</li>
<li>Unit Demension: 1470 X 915 X 150 MM</li>
<li>Height Demension: 15.000</li>
<li>Length Demension :147.000</li>
<li>Width Demension: 91.500</li>
<li>Material: Carbide</li>
<li>Type: Outside Micrometer</li>
<li>Dimension uom: 147.000</li>
</ul>

Mitutoyo Od Micrometer 1000-1100/0.01MM 105-408

mitutoyo od micrometer 1000-1100/0.01mm 105-408 measuring tools alat ukur lainnya pengukur lain mitutoyo/三丰 外径千分尺1000-1100/0.01mm 其他量具用品 三丰

mitutoyo-od-micrometer-1000-1100-0-01mm-105-408

<h3 class="md-block-header-three"> Post It 653 3M</h3>Deskripsi : Sticky Note MemoModel : Post It 653Ukuran : 38 x 51 mm

<h3> Post It 653 3M</h3>
Deskripsi : Sticky Note Memo
Model : Post It 653
Ukuran : 38 x 51 mm

Nadaa Kautsar

Others

STANLEY

JOYKO

WHOLESAFETY

Building Materials

Filing and Storage

Kitchen Utensils

Safety Gloves

Copier Paper

Ink Cartridge, Drums & Toners

Post It 653 3M

post 653 3m office supplies peralatan kantor post-it siarkan ia bekalan pejabat post-it/发表它 邮寄 办公用品 发表它

post-it-653-3m

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS408 ID 59.69 X CS 6.99Material : Silicone 70 Shore Additional InformationSilicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/sSyk2yrHBRZX889QuChdQR.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS408
&nbsp;ID 59.69 X CS 6.99
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:fppg6"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/sSyk2yrHBRZX889QuChdQR.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="fppg6" 
 layout="nodisplay"></amp-image-lightbox>

ID - Yong Leng Trading ETH Account

KOYO

Triangle

Optibelt

Nachi

Roller Bearing

Hydraulic Seals

Linear Bearing

Plain Bearings

Cam Follower Bearings

V Rings

ORING AS568 AS408 ID 59.69 X CS 6.99 Silicone 70 Shore

oring as568 as408 id 59.69 cs 6.99 silicone 70 shore silikon ring o-ring oem gelang oem/oem代工 6.99硅胶70肖氏 o型圈 oem代工

oring-as568-as408-id-59-69-x-cs-6-99-silicone-70-shore

MOXA Entry-level managed Ethernet switch EDS-408A-SS-SC :

The EDS-408A-SS-SC-T-IEX are entry-level 8-port managed Ethernet switches designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-408A switches.

Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy

IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported

Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01

Supports MXstudio for easy, visualized industrial network management

-40-75°C (-40-167°F) operating temperaature range

<h3 class="md-block-header-three">MOXA Entry-level managed Ethernet switch EDS-408A-SS-SC :</h3>The EDS-408A-SS-SC-T-IEX are entry-level 8-port managed Ethernet switches designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-408A switches.<ul class="md-block-unordered-list-item"><li>8 Port Managed Ethernet Switch</li><ul class="md-block-unordered-list-item"><li>Ethernet: 6 x 10/100BaseT(X)</li><li>Fiber: 2 x Multi-mode, SC connector</li></ul><li>Turbo Ring and Turbo Chain (recovery time &lt; 20 ms @ 250 switches), and RSTP/STP for network redundancy</li><li>IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported</li><li>Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01</li><li>IECEx certified</li><li>Supports MXstudio for easy, visualized industrial network management</li><li>-40-75°C (-40-167°F) operating temperaature range</li></ul>

<h3>MOXA Entry-level managed Ethernet switch EDS-408A-SS-SC :</h3>
The EDS-408A-SS-SC-T-IEX are entry-level 8-port managed Ethernet switches designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-408A switches.
<ul>
<li>8 Port Managed Ethernet Switch</li>
<ul>
<li>Ethernet: 6 x 10/100BaseT(X)</li>
<li>Fiber: 2 x Multi-mode, SC connector</li>
</ul>
<li>Turbo Ring and Turbo Chain (recovery time &lt; 20 ms @ 250 switches), and RSTP/STP for network redundancy</li>
<li>IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported</li>
<li>Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01</li>
<li>IECEx certified</li>
<li>Supports MXstudio for easy, visualized industrial network management</li>
<li>-40-75°C (-40-167°F) operating temperaature range</li>
</ul>

Light Signal 

Networking Products

Network Routers

Led Lights

Emergency Lights

Data Storage

Other Electrical Accessories

Light Bulbs

Iis Sriyanah 

Moxa Entry-level Managed Ethernet Switch EDS-408A-SS-SC

moxa entry-level managed ethernet switch eds-408a-ss-sc network switches sakelar jaringan suis rangkaian moxa/艾草 入门级网管型以太网交换机 网络交换机 艾草

moxa-entry-level-managed-ethernet-switch-eds-408a-ss-sc

MOXA Entry-level managed Ethernet switch EDS-408A-MM-SC :

The EDS-408A-MM-SC-T-IEX are entry-level 8-port managed Ethernet switches designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-408A switches.

<h3 class="md-block-header-three">MOXA Entry-level managed Ethernet switch EDS-408A-MM-SC :</h3>The EDS-408A-MM-SC-T-IEX are entry-level 8-port managed Ethernet switches designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-408A switches.<ul class="md-block-unordered-list-item"><li>8 Port Managed Ethernet Switch</li><ul class="md-block-unordered-list-item"><li>Ethernet: 6 x 10/100BaseT(X)</li><li>Fiber: 2 x Multi-mode, SC connector</li></ul><li>Turbo Ring and Turbo Chain (recovery time &lt; 20 ms @ 250 switches), and RSTP/STP for network redundancy</li><li>IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported</li><li>Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01</li><li>IECEx certified</li><li>Supports MXstudio for easy, visualized industrial network management</li><li>-40-75°C (-40-167°F) operating temperaature range</li></ul>

<h3>MOXA Entry-level managed Ethernet switch EDS-408A-MM-SC :</h3>
The EDS-408A-MM-SC-T-IEX are entry-level 8-port managed Ethernet switches designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-408A switches.
<ul>
<li>8 Port Managed Ethernet Switch</li>
<ul>
<li>Ethernet: 6 x 10/100BaseT(X)</li>
<li>Fiber: 2 x Multi-mode, SC connector</li>
</ul>
<li>Turbo Ring and Turbo Chain (recovery time &lt; 20 ms @ 250 switches), and RSTP/STP for network redundancy</li>
<li>IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported</li>
<li>Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01</li>
<li>IECEx certified</li>
<li>Supports MXstudio for easy, visualized industrial network management</li>
<li>-40-75°C (-40-167°F) operating temperaature range</li>
</ul>

Moxa Entry-level Managed Ethernet Switch EDS-408A-MM-SC

moxa entry-level managed ethernet switch eds-408a-mm-sc network switches sakelar jaringan suis terurus peringkat kemasukan rangkaian moxa/艾草 入门级网管型以太网交换机 网络交换机 艾草

moxa-entry-level-managed-ethernet-switch-eds-408a-mm-sc

Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore    

Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.

EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51`C to 149`C) and it has good retention of compression.

In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance. 

The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.

ORING AS568 AS408 ID 59.69 X CS 6.99Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore Additional InformationEthylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51&#x60;C to 149&#x60;C) and it has good retention of compression.In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance. The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.Temperature Range (Dry Heat)Low: -60&#x60;F / -51&#x60;C High: 300&#x60;F / 149&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Petroleum Oils / Fuels - PoorSteam Up to 399&#x60;F– ExcellentGas Impermeability - GoodCompressiom - GoodAbrasion Resistance - GoodOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/QoUqvE0HD5Mspw_OR5DIkh.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS408
&nbsp;ID 59.69 X CS 6.99
Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.
EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51`C to 149`C) and it has good retention of compression.
In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance.&nbsp;
The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.
<ins>Temperature Range (Dry Heat)</ins>
Low: -60`F / -51`C High: 300`F / 149`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Petroleum Oils / Fuels - Poor
Steam Up to 399`F– Excellent
Gas Impermeability - Good
Compressiom - Good
Abrasion Resistance - Good
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:blp7d"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/QoUqvE0HD5Mspw_OR5DIkh.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="blp7d" 
 layout="nodisplay"></amp-image-lightbox>