ELORA

Facom

FLUKE

Iwata

MITUTOYO

Safeware

TUNGALOY

Safety

safety

Body Harness

body-harness

Office & School Consumables

office-school-consumables

Filing and Storage

filing-and-storage

Spanners & Sockets

spanners-sockets

Impact Sockets

impact-sockets

Mechanical Parts

mechanical-parts

O Ring

o-ring

Test & Measurement

test-measurement

Other Measuring Tools

other-measuring-tools

Painting Materials

painting-materials

Painting Tools

painting-tools

Power Tools

power-tools

Power Tools Accessories

power-tools-accessories

Other Hand Tools

other-hand-tools

Pullers

pullers

Vernier Calipers

vernier-calipers

for pulling off ball bearings, gear-wheels, discs, etc.

by turning the puller hooks usable as external and internal puller

<h3 class="md-block-header-three">Elora Standard Puller 317-350 </h3><ul class="md-block-unordered-list-item"><li>for pulling off ball bearings, gear-wheels, discs, etc.</li><li>heavy-duty, forged pattern</li><li>2 arms</li><li>by turning the puller hooks usable as external and internal puller</li><li>zinc-plated, spindle gunmetal-finish</li><li>high grade tool steel</li><li> External tension 40-350 mm</li><li> Internal tension 190-400 mm</li><li> Span depth 200 mm</li><li>a 6.5 mm</li></ul>

<h3>Elora Standard Puller 317-350&nbsp;</h3>
<ul>
<li>for pulling off ball bearings, gear-wheels, discs, etc.</li>
<li>heavy-duty, forged pattern</li>
<li>2 arms</li>
<li>by turning the puller hooks usable as external and internal puller</li>
<li>zinc-plated, spindle gunmetal-finish</li>
<li>high grade tool steel</li>
<li>&nbsp;External tension 40-350 mm</li>
<li>&nbsp;Internal tension 190-400 mm</li>
<li>&nbsp;Span depth 200 mm</li>
<li>a 6.5 mm</li>
</ul>

Kennedy

FORCE

WIHA

MAKITA

Logitech

Enerpac

Fluke Networks

IT Accessories

Screwdriver Bits & Bit Set

Screwdrivers

Ring Spanners

Sockets

Hex Keys & Sets

Open End Spanners

Ball Bearings

Stefy

Elora Standard Puller 317-350

elora standard puller 317-350 penarik standar pullers elora/埃洛拉 标准拉拔器 拔轮器 埃洛拉

elora-standard-puller-317-350

Elora 317-80 Standard Puller Span Width 15-80 mm

Description:- For pulling off ball bearings, gear-wheels, discs, etc.
heavy-duty, forged pattern
2 arms
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle gunmetal-finish
high grade tool steel

Elora 317-120 Standard Puller Span Width 50-120 mm

Elora 317-160 Standard Puller Span Width 20-160 mm

Elora 317-200 Standard Puller Span Width 20-200 mm

Elora 317-250 Standard Puller Span Width 40-250 mm

Elora 317-350 Standard Puller Span Width 40-350 mm

<h3 class="md-block-header-three">Elora 317-80 Standard Puller Span Width 15-80 mm</h3><h3 class="md-block-header-three">Product code: 317000806100 </h3><ul class="md-block-unordered-list-item"><li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. heavy-duty, forged pattern 2 arms by turning the puller hooks usable as external and internal puller zinc-plated, spindle gunmetal-finish high grade tool steel</li><li>External Tension mm:- 15-80</li><li>Internal Tension mm:- 70-130</li><li>Span Depth mm:- 100</li><li>a mm:- 3</li><li>b mm:- 12</li><li>c mm:- 22</li><li>d mm:- 22</li><li>Wrench size mm:- 17</li><li>Weight g:- 922</li></ul> <h3 class="md-block-header-three">Elora 317-120 Standard Puller Span Width 50-120 mm</h3><h3 class="md-block-header-three">Product code: 317001206100 </h3><ul class="md-block-unordered-list-item"><li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. heavy-duty, forged pattern 2 arms by turning the puller hooks usable as external and internal puller zinc-plated, spindle gunmetal-finish high grade tool steel</li><li>External Tension mm:- 15-120</li><li>Internal Tension mm:- 80-170</li><li>Span Depth mm:- 100</li><li>a mm:- 3</li><li>b mm:- 12</li><li>c mm:- 22</li><li>d mm:- 22</li><li>Wrench size mm:- 17</li><li>Weight g:- 1052</li></ul> <h3 class="md-block-header-three">Elora 317-160 Standard Puller Span Width 20-160 mm</h3><h3 class="md-block-header-three">Product code: 317001606100 </h3><ul class="md-block-unordered-list-item"><li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. heavy-duty, forged pattern 2 arms by turning the puller hooks usable as external and internal puller zinc-plated, spindle gunmetal-finish high grade tool steel</li><li>External Tension mm:- 20-160</li><li>Internal Tension mm:- 110-210</li><li>Span Depth mm:- 150</li><li>a mm:- 4</li><li>b mm:- 18</li><li>c mm:- 30</li><li>d mm:- 29</li><li>Wrench size mm:- 22</li><li>Weight g:- 2700</li></ul> <h3 class="md-block-header-three">Elora 317-200 Standard Puller Span Width 20-200 mm</h3><h3 class="md-block-header-three">Product code: 317002006100 </h3><ul class="md-block-unordered-list-item"><li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. heavy-duty, forged pattern 2 arms by turning the puller hooks usable as external and internal puller zinc-plated, spindle gunmetal-finish high grade tool steel</li><li>External Tension mm:- 20-200</li><li>Internal Tension mm:- 120-250</li><li>Span Depth mm:- 150</li><li>a mm:- 4</li><li>b mm:- 18</li><li>c mm:- 30</li><li>d mm:- 29</li><li>Wrench size mm:- 22</li><li>Weight g:- 2920</li></ul> <h3 class="md-block-header-three">Elora 317-250 Standard Puller Span Width 40-250 mm</h3><h3 class="md-block-header-three">Product code: 317002506100 </h3><ul class="md-block-unordered-list-item"><li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. heavy-duty, forged pattern 2 arms by turning the puller hooks usable as external and internal puller zinc-plated, spindle gunmetal-finish high grade tool steel</li><li>External Tension mm:- 40-250</li><li>Internal Tension mm:- 170-300</li><li>Span Depth mm:- 200</li><li>a mm:- 6,5</li><li>b mm:- 23</li><li>c mm:- 43</li><li>d mm:- 38</li><li>Wrench size mm:- 27</li><li>Weight g:- 6760</li></ul><h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Elora 317-350 Standard Puller Span Width 40-350 mm</h3><h3 class="md-block-header-three">Product code: 317003506100 </h3><ul class="md-block-unordered-list-item"><li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. heavy-duty, forged pattern 2 arms by turning the puller hooks usable as external and internal puller zinc-plated, spindle gunmetal-finish high grade tool steel</li><li>External Tension mm:- 40-350</li><li>Internal Tension mm:- 190-400</li><li>Span Depth mm:- 200</li><li>a mm:- 6,5</li><li>b mm:- 23</li><li>c mm:- 43</li><li>d mm:- 38</li><li>Wrench size mm:- 27</li><li>Weight g:- 7760</li></ul>

<h3>Elora 317-80 Standard Puller Span Width 15-80 mm</h3>
<h3>Product code: 317000806100 </h3>
<ul>
<li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. 
heavy-duty, forged pattern 
2 arms 
by turning the puller hooks usable as external and internal puller 
zinc-plated, spindle gunmetal-finish 
high grade tool steel</li>
<li>External Tension mm:- 15-80</li>
<li>Internal Tension mm:- 70-130</li>
<li>Span Depth mm:- 100</li>
<li>a mm:- 3</li>
<li>b mm:- 12</li>
<li>c mm:- 22</li>
<li>d mm:- 22</li>
<li>Wrench size mm:- 17</li>
<li>Weight g:- 922</li>
</ul>
&nbsp;
<h3>Elora 317-120 Standard Puller Span Width 50-120 mm</h3>
<h3>Product code: 317001206100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. 
heavy-duty, forged pattern 
2 arms 
by turning the puller hooks usable as external and internal puller 
zinc-plated, spindle gunmetal-finish 
high grade tool steel</li>
<li>External Tension mm:- 15-120</li>
<li>Internal Tension mm:- 80-170</li>
<li>Span Depth mm:- 100</li>
<li>a mm:- 3</li>
<li>b mm:- 12</li>
<li>c mm:- 22</li>
<li>d mm:- 22</li>
<li>Wrench size mm:- 17</li>
<li>Weight g:- 1052</li>
</ul>
&nbsp;
<h3>Elora 317-160 Standard Puller Span Width 20-160 mm</h3>
<h3>Product code: 317001606100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. 
heavy-duty, forged pattern 
2 arms 
by turning the puller hooks usable as external and internal puller 
zinc-plated, spindle gunmetal-finish 
high grade tool steel</li>
<li>External Tension mm:- 20-160</li>
<li>Internal Tension mm:- 110-210</li>
<li>Span Depth mm:- 150</li>
<li>a mm:- 4</li>
<li>b mm:- 18</li>
<li>c mm:- 30</li>
<li>d mm:- 29</li>
<li>Wrench size mm:- 22</li>
<li>Weight g:- 2700</li>
</ul>
&nbsp;
<h3>Elora 317-200 Standard Puller Span Width 20-200 mm</h3>
<h3>Product code: 317002006100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. 
heavy-duty, forged pattern 
2 arms 
by turning the puller hooks usable as external and internal puller 
zinc-plated, spindle gunmetal-finish 
high grade tool steel</li>
<li>External Tension mm:- 20-200</li>
<li>Internal Tension mm:- 120-250</li>
<li>Span Depth mm:- 150</li>
<li>a mm:- 4</li>
<li>b mm:- 18</li>
<li>c mm:- 30</li>
<li>d mm:- 29</li>
<li>Wrench size mm:- 22</li>
<li>Weight g:- 2920</li>
</ul>
&nbsp;
<h3>Elora 317-250 Standard Puller Span Width 40-250 mm</h3>
<h3>Product code: 317002506100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. 
heavy-duty, forged pattern 
2 arms 
by turning the puller hooks usable as external and internal puller 
zinc-plated, spindle gunmetal-finish 
high grade tool steel</li>
<li>External Tension mm:- 40-250</li>
<li>Internal Tension mm:- 170-300</li>
<li>Span Depth mm:- 200</li>
<li>a mm:- 6,5</li>
<li>b mm:- 23</li>
<li>c mm:- 43</li>
<li>d mm:- 38</li>
<li>Wrench size mm:- 27</li>
<li>Weight g:- 6760</li>
</ul>
<h3>&nbsp;</h3>
<h3>Elora 317-350 Standard Puller Span Width 40-350 mm</h3>
<h3>Product code: 317003506100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For pulling off ball bearings, gear-wheels, discs, etc. 
heavy-duty, forged pattern 
2 arms 
by turning the puller hooks usable as external and internal puller 
zinc-plated, spindle gunmetal-finish 
high grade tool steel</li>
<li>External Tension mm:- 40-350</li>
<li>Internal Tension mm:- 190-400</li>
<li>Span Depth mm:- 200</li>
<li>a mm:- 6,5</li>
<li>b mm:- 23</li>
<li>c mm:- 43</li>
<li>d mm:- 38</li>
<li>Wrench size mm:- 27</li>
<li>Weight g:- 7760</li>
</ul>

Elora 317 Standard Puller

elora 317 standard puller penarik standar pullers piawai elora/埃洛拉 317标准拔轮器 拔轮器 埃洛拉

elora-317-standard-puller

Sizes

ID - Yong Leng Trading ETH Account

KOYO

Others

Triangle

Optibelt

Nachi

Roller Bearing

Hydraulic Seals

Linear Bearing

Plain Bearings

Cam Follower Bearings

Other Tools

V Rings

buyerIntroduction

Oring Metric 317 X 4 Nbr 70 Black Shiny

oring metric 317 nbr 70 black shiny metrik hitam mengkilap ring o-ring oem berkilat gelang 公制 黑色闪亮 o型圈 oem代工

oring-metric-317-x-4-nbr-70-black-shiny

<h3 class="md-block-header-three">Elora Standard Puller 317-250 </h3><ul class="md-block-unordered-list-item"><li>for pulling off ball bearings, gear-wheels, discs, etc.</li><li>heavy-duty, forged pattern</li><li>2 arms</li><li>by turning the puller hooks usable as external and internal puller</li><li>zinc-plated, spindle gunmetal-finish</li><li>high grade tool steel</li><li> External tension 40-250 mm</li><li> Internal tension 170-300 mm</li><li>Span depth 200 mm</li></ul>

<h3>Elora Standard Puller 317-250&nbsp;</h3>
<ul>
<li>for pulling off ball bearings, gear-wheels, discs, etc.</li>
<li>heavy-duty, forged pattern</li>
<li>2 arms</li>
<li>by turning the puller hooks usable as external and internal puller</li>
<li>zinc-plated, spindle gunmetal-finish</li>
<li>high grade tool steel</li>
<li>&nbsp;External tension 40-250 mm</li>
<li>&nbsp;Internal tension 170-300 mm</li>
<li>Span depth 200 mm</li>
</ul>

Elora Standard Puller 317-250

elora standard puller 317-250 penarik standar pullers elora/埃洛拉 标准拉拔器 拔轮器 埃洛拉

elora-standard-puller-317-250

<h3 class="md-block-header-three">Elora Standard Puller 317- 80 </h3><ul class="md-block-unordered-list-item"><li>for pulling off ball bearings, gear-wheels, discs, etc.</li><li>heavy-duty, forged pattern</li><li>2 arms</li><li>by turning the puller hooks usable as external and internal puller</li><li>zinc-plated, spindle gunmetal-finish</li><li>high grade tool steel</li><li> External tension 15-80 mm</li><li> Internal tension 70-130 mm</li><li> Span depth 100 mm</li></ul>

<h3>Elora Standard Puller 317- 80&nbsp;</h3>
<ul>
<li>for pulling off ball bearings, gear-wheels, discs, etc.</li>
<li>heavy-duty, forged pattern</li>
<li>2 arms</li>
<li>by turning the puller hooks usable as external and internal puller</li>
<li>zinc-plated, spindle gunmetal-finish</li>
<li>high grade tool steel</li>
<li>&nbsp;External tension 15-80 mm</li>
<li>&nbsp;Internal tension 70-130 mm</li>
<li>&nbsp;Span depth 100 mm</li>
</ul>

Elora Standard Puller 317- 80

elora standard puller 317- 80 penarik standar pullers elora/埃洛拉 标准拉拔器 拔轮器 埃洛拉

elora-standard-puller-317-80

<h3 class="md-block-header-three">Elora Standard Puller 317-120 </h3><ul class="md-block-unordered-list-item"><li>for pulling off ball bearings, gear-wheels, discs, etc.</li><li>heavy-duty, forged pattern</li><li>2 arms</li><li>by turning the puller hooks usable as external and internal puller</li><li>zinc-plated, spindle gunmetal-finish</li><li>high grade tool steel</li><li> External tension 15-120 mm</li><li> Internal tension 80-170 </li><li> Span depth 100 mm</li></ul>

<h3>Elora Standard Puller 317-120&nbsp;</h3>
<ul>
<li>for pulling off ball bearings, gear-wheels, discs, etc.</li>
<li>heavy-duty, forged pattern</li>
<li>2 arms</li>
<li>by turning the puller hooks usable as external and internal puller</li>
<li>zinc-plated, spindle gunmetal-finish</li>
<li>high grade tool steel</li>
<li>&nbsp;External tension 15-120 mm</li>
<li>&nbsp;Internal tension 80-170&nbsp;</li>
<li>&nbsp;Span depth 100 mm</li>
</ul>

Elora Standard Puller 317-120

elora standard puller 317-120 penarik standar pullers elora/埃洛拉 标准拉拔器 拔轮器 埃洛拉

elora-standard-puller-317-120

<h3 class="md-block-header-three">Elora Standard Puller 317-200 </h3><ul class="md-block-unordered-list-item"><li>for pulling off ball bearings, gear-wheels, discs, etc.</li><li>heavy-duty, forged pattern</li><li>2 arms</li><li>by turning the puller hooks usable as external and internal puller</li><li>zinc-plated, spindle gunmetal-finish</li><li>high grade tool steel </li><li>External tension20-200 mm</li><li>Internal tension 120-250		 mm</li><li>Span depth 150 mm</li><li>a 4 mm</li></ul>

<h3>Elora Standard Puller 317-200&nbsp;</h3>
<ul>
<li>for pulling off ball bearings, gear-wheels, discs, etc.</li>
<li>heavy-duty, forged pattern</li>
<li>2 arms</li>
<li>by turning the puller hooks usable as external and internal puller</li>
<li>zinc-plated, spindle gunmetal-finish</li>
<li>high grade tool steel&nbsp;</li>
<li>External tension20-200 mm</li>
<li>Internal tension 120-250		 mm</li>
<li>Span depth 150 mm</li>
<li>a 4 mm</li>
</ul>

Elora Standard Puller 317-200

elora standard puller 317-200 penarik standar pullers elora/埃洛拉 标准拉拔器 拔轮器 埃洛拉

elora-standard-puller-317-200

<h3 class="md-block-header-three">Elora Standard Puller 317-160 </h3><ul class="md-block-unordered-list-item"><li>for pulling off ball bearings, gear-wheels, discs, etc.</li><li>heavy-duty, forged pattern</li><li>2 arms</li><li>by turning the puller hooks usable as external and internal puller</li><li>zinc-plated, spindle gunmetal-finish</li><li>high grade tool steel </li><li>External tension 20-160 mm</li><li>Internal tension 110-210 mm</li><li>Span depth 150 mm</li><li>a 4 mm</li></ul>

<h3>Elora Standard Puller 317-160&nbsp;</h3>
<ul>
<li>for pulling off ball bearings, gear-wheels, discs, etc.</li>
<li>heavy-duty, forged pattern</li>
<li>2 arms</li>
<li>by turning the puller hooks usable as external and internal puller</li>
<li>zinc-plated, spindle gunmetal-finish</li>
<li>high grade tool steel&nbsp;</li>
<li>External tension 20-160 mm</li>
<li>Internal tension 110-210 mm</li>
<li>Span depth 150 mm</li>
<li>a 4 mm</li>
</ul>

Elora Standard Puller 317-160

elora standard puller 317-160 penarik standar pullers elora/埃洛拉 标准拉拔器 拔轮器 埃洛拉

elora-standard-puller-317-160

These Digital Protractors present inclination values on an easy-to-read liquid crystal display.

The measurements are generated by an electronic gravity sensor and processed by the latest low-power electronic circuit technology.

Simple calibration requiring no special fixtures. 

Display remains up right to view at all angles.(950-317, Pro 360 Model). 

RS232C outp ut. (950-318 Pro 3600 Model).

Accuracy: +/- 0.1 Deg. Level +/- 10 Deg., Plumb +/- 10 Deg., +/- 0.2 Deg. Maximum error 

Battery Life: 500 Hrs. Standard 9-Volt Battery 

Storage Temperature: -2 0-65 Deg.C -4-149 Deg.F 

Operating Temperature: -5-50 Deg.C 23-122 Deg.F

<h3 class="md-block-header-three">MITUTOYO Dig Protactor PR0360 950-317</h3> Benefits<ul class="md-block-unordered-list-item"><li>These Digital Protractors present inclination values on an easy-to-read liquid crystal display.</li><li>The measurements are generated by an electronic gravity sensor and processed by the latest low-power electronic circuit technology.</li></ul>Features<ul class="md-block-unordered-list-item"><li>Full 360 Deg. range (90 Deg. x 4). </li><li>Machined aluminum frame. </li><li>Alternate reference (zero). </li><li>Reading hold. </li><li>Simple calibration requiring no special fixtures. </li><li>Display remains up right to view at all angles.(950-317, Pro 360 Model). </li><li>RS232C outp ut. (950-318 Pro 3600 Model).</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Accuracy: +/- 0.1 Deg. Level +/- 10 Deg., Plumb +/- 10 Deg., +/- 0.2 Deg. Maximum error </li><li>Battery Life: 500 Hrs. Standard 9-Volt Battery </li><li>Cross Axis Error: Minimal </li><li>Compatible Repeatability: +/- 0.1 Deg. </li><li>Resolution: 0.1 Deg. </li><li>Storage Temperature: -2 0-65 Deg.C -4-149 Deg.F </li><li>Operating Temperature: -5-50 Deg.C 23-122 Deg.F</li></ul><h4 class="md-block-header-four">Technical Spec</h4><ul class="md-block-unordered-list-item"><li>Netto Weight: 0.315 KG</li><li>Unit Demension: 208 X 135 X 56 MM</li><li>Height Demension: 5.000</li><li>Length Demension: 20.700</li><li>Width Demension: 13.300</li><li>Type: Digital Protactor</li><li>Dimension uom: 20.700 </li></ul>

<h3>MITUTOYO Dig Protactor PR0360 950-317</h3>
 Benefits
<ul>
<li>These Digital Protractors present inclination values on an easy-to-read liquid crystal display.</li>
<li>The measurements are generated by an electronic gravity sensor and processed by the latest low-power electronic circuit technology.</li>
</ul>
Features
<ul>
<li>Full 360 Deg. range (90 Deg. x 4).&nbsp;</li>
<li>Machined aluminum frame.&nbsp;</li>
<li>Alternate reference (zero).&nbsp;</li>
<li>Reading hold.&nbsp;</li>
<li>Simple calibration requiring no special fixtures.&nbsp;</li>
<li>Display remains up right to view at all angles.(950-317, Pro 360 Model).&nbsp;</li>
<li>RS232C outp ut. (950-318 Pro 3600 Model).</li>
</ul>
Specifications
<ul>
<li>Accuracy: +/- 0.1 Deg. Level +/- 10 Deg., Plumb +/- 10 Deg., +/- 0.2 Deg. Maximum error&nbsp;</li>
<li>Battery Life: 500 Hrs. Standard 9-Volt Battery&nbsp;</li>
<li>Cross Axis Error: Minimal&nbsp;</li>
<li>Compatible Repeatability: +/- 0.1 Deg.&nbsp;</li>
<li>Resolution: 0.1 Deg.&nbsp;</li>
<li>Storage Temperature: -2 0-65 Deg.C -4-149 Deg.F&nbsp;</li>
<li>Operating Temperature: -5-50 Deg.C 23-122 Deg.F</li>
</ul>
<h4>Technical Spec</h4>
<ul>
<li>Netto Weight: 0.315 KG</li>
<li>Unit Demension: 208 X 135 X 56 MM</li>
<li>Height Demension: 5.000</li>
<li>Length Demension: 20.700</li>
<li>Width Demension: 13.300</li>
<li>Type: Digital Protactor</li>
<li>Dimension uom: 20.700&nbsp;</li>
</ul>

Pferd

METABO

BRADY

FUJI Tools

NILFISK

TOKU

Drill Bits & Drill Bit Sets

Grinding Abrasives

Weight, Force & Pressure Gauges

Tap & Die Wrenches

Automotive Equipment

Drills, Impact Drivers & Wrenches

PT Kawan Lama Sejahtera ETH Account

Mitutoyo Dig Protactor PR0360 950-317

mitutoyo dig protactor pr0360 950-317 measuring tools alat ukur lainnya pengukur lain mitutoyo/三丰 挖掘量角器 其他量具用品 三丰

mitutoyo-dig-protactor-pr0360-950-317

FACOM Impact Bit Square Drive 1/2-17MM ENH.317

<h3 class="md-block-header-three">FACOM Impact Bit Square Drive 1/2-17MM ENH.317</h3><h3 class="md-block-header-three"> Specifications</h3><ul class="md-block-unordered-list-item"><li>Drive 1/2 INC - 12.7 mm. </li><li>Length : 50 mm </li><li>Head : 17 mm</li><li>Netto Weight;0.073 KG</li><li>Unit Demension:50 X 13 X 13 MM</li><li>Height Demension:13.000</li><li>Length Demension:50.000</li><li>Width Demension:13.000</li><li>Material:Iron</li><li>Square Drive:1/2 INC-12.7 MM</li><li>Type:Impact Bits</li><li>Dimension uom:50.000</li></ul>

<h3>FACOM Impact Bit Square Drive 1/2-17MM ENH.317</h3>
<h3>&nbsp;Specifications</h3>
<ul>
<li>Drive 1/2 INC - 12.7 mm.&nbsp;</li>
<li>Length : 50 mm&nbsp;</li>
<li>Head : 17 mm</li>
<li>Netto Weight;0.073 KG</li>
<li>Unit Demension:50 X 13 X 13 MM</li>
<li>Height Demension:13.000</li>
<li>Length Demension:50.000</li>
<li>Width Demension:13.000</li>
<li>Material:Iron</li>
<li>Square Drive:1/2 INC-12.7 MM</li>
<li>Type:Impact Bits</li>
<li>Dimension uom:50.000</li>
</ul>

Facom Impact Bit Square Drive 1/2-17MM ENH.317

facom impact bit square drive 1/2-17mm enh.317 sockets soket dampak hentaman facom/法康 冲击钻头方形驱动器 冲击插座 法康

facom-impact-bit-square-drive-1-2-17mm-enh-317

<h3 class="md-block-header-three">TUNGALOY Part Shims ELSD317BL</h3><h3 class="md-block-header-three">Technical Specifications</h3><ul class="md-block-unordered-list-item"><li>Netto Weight : 0.020 KG</li><li>Height Demension : 1.000</li><li>Length Demension : 2.000</li><li>Width Demension : 1.000</li></ul>

<h3>TUNGALOY Part Shims ELSD317BL</h3>
<h3>Technical Specifications</h3>
<ul>
<li>Netto Weight : 0.020 KG</li>
<li>Height Demension : 1.000</li>
<li>Length Demension : 2.000</li>
<li>Width Demension : 1.000</li>
</ul>

Tungaloy Part Shims ELSD317BL

tungaloy part shims elsd317bl power tools accessories aksesoris perkakas listrik bahagian aksesori alat kuasa tungaloy/泰珂洛 零件垫片 电动工具配件 泰珂洛

tungaloy-part-shims-elsd317bl

Flexible fit with conical and hollow structure

Masks up to the screw entrance by roughening

With a knob that is convenient for removal

Prevents excessive paint from adhering to the screw hole entrance

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Flexible fit with conical and hollow structure</li><li>Masks up to the screw entrance by roughening</li><li>With a knob that is convenient for removal</li><li>Prevents excessive paint from adhering to the screw hole entrance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Conical plug F</li><li>Colour: Yellow</li><li>d: 28.6 mm</li><li>D: 31.7 mm</li><li>id: 20.8 mm</li><li>L: 25.4 mm</li><li>Material: Silicon</li><li>Heat Resistant Temperature: 220°C</li><li>Hardness (Shore A): Approx. 50-80</li></ul><h3 class="md-block-header-three">Available MOQ:</h3><ul class="md-block-unordered-list-item"><li>SKU: HBFS317-P - 1 Piece/Pack</li><li>SKU: HBFS317-B - 50 Piece/Box</li></ul>

<h3>Features:</h3>
<ul>
<li>Flexible fit with conical and hollow structure</li>
<li>Masks up to the screw entrance by roughening</li>
<li>With a knob that is convenient for removal</li>
<li>Prevents excessive paint from adhering to the screw hole entrance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Conical plug F</li>
<li>Colour: Yellow</li>
<li>d: 28.6 mm</li>
<li>D: 31.7 mm</li>
<li>id: 20.8 mm</li>
<li>L: 25.4 mm</li>
<li>Material: Silicon</li>
<li>Heat Resistant Temperature: 220°C</li>
<li>Hardness (Shore A): Approx. 50-80</li>
</ul>
<h3>Available MOQ:</h3>
<ul>
<li>SKU: HBFS317-P - 1 Piece/Pack</li>
<li>SKU: HBFS317-B - 50 Piece/Box</li>
</ul>

Iwata Conical Plug F 31.7mm

iwata conical plug 31.7mm painting tools alat melukis mengecat iwata/岩田 锥形塞f 涂装工具 岩田

iwata-conical-plug-f-31-7mm

HBFS317-P - 1 Piece/Pack

HBFS317-B - 50 Piece/Box

Material :Ethylene Propylene Diene Monomer (EPDM) 70 Shore    

Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.

EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51`C to 149`C) and it has good retention of compression.

In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance. 

The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.

Overview on Application Rating for Material EPDM

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS317 ID 23.16 x CS 5.33Material :Ethylene Propylene Diene Monomer (EPDM) 70 Shore Additional InformationEthylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51&#x60;C to 149&#x60;C) and it has good retention of compression.In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance. The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.Temperature Range (Dry Heat)Low: -60&#x60;F / -51&#x60;C High: 300&#x60;F / 149&#x60;COverview on Application Rating for Material EPDMProperties (Rating)Petroleum Oils / Fuels - PoorSteam Up to 399&#x60;F– ExcellentGas Impermeability - GoodCompressiom - GoodAbrasion Resistance - GoodOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/PHXGn_9dqp2XR4sY~Dgzeb.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS317
&nbsp;ID 23.16 x CS 5.33
Material :Ethylene Propylene Diene Monomer (EPDM) 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
<ins>Additional Information</ins>
Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.
EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51`C to 149`C) and it has good retention of compression.
In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance.&nbsp;
The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.
<ins>Temperature Range (Dry Heat)</ins>
Low: -60`F / -51`C High: 300`F / 149`C
<ins>Overview on Application Rating for Material EPDM</ins>
Properties (Rating)
Petroleum Oils / Fuels - Poor
Steam Up to 399`F– Excellent
Gas Impermeability - Good
Compressiom - Good
Abrasion Resistance - Good
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:7i66f"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/PHXGn_9dqp2XR4sY~Dgzeb.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="7i66f" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS317 ID 23.16 x CS 5.33 Ethylene Propylene Diene Monomer (EPDM) 70 Shore

oring as568 as317 id 23.16 cs 5.33 ethylene propylene diene monomer (epdm) 70 shore ring o-ring oem gelang oem/oem代工 5.33乙烯丙烯二烯单体（epdm）70肖氏 o型圈 oem代工

oring-as568-as317-id-23-16-x-cs-5-33-ethylene-propylene-diene-monomer-epdm-70-shore

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

ORING AS568 AS317 ID 23.16 x CS 5.33Material : Silicone 70 Shore Additional InformationSilicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/CQtu68rj2BdnXOTJY~KCRV.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS317&nbsp;
ID 23.16 x CS 5.33
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;<ins>Additional Information</ins>
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:vggt"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/CQtu68rj2BdnXOTJY~KCRV.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="vggt" 
 layout="nodisplay"></amp-image-lightbox>