Jabsco 1.5 Inch Self-Priming Utility Pump 53081-2003

The Jabsco 53081-2003 is a bronze Flexible Impeller pump with a Nitrile Impeller, Nitrile/Carbon/Ceramic Mechanical Seal, 1-1/2 Inch BSP threaded Ports, coupled to a 1450 RPM, 230 Volts, 50 HZ Motor. This Pump has an integral fluid reservoir to protect pump against dry running for up to 30 minutes. The motor is 4 Pole, single phase, 550 Watt, AC. Face and Foot mounting B3-B14. Enclosure IP55, Frame size 80 all IEC 72 standard. Fitted with manual reset thermal overload. Jabsco bronze bodied AC motor pumps are self-priming, portable and versatile, making them ideal for a wide range of applications wherever AC power is available.

Features :

• Pump Body:Bronze
• Impeller: Nitrile
• Shaft Seal: Nitrile/Carbon/Ceramic Mechanical Seal
• Port Size: Ports are 1-1/2 Inch BSP threaded

Product Specs :

• Self primes from dry up to 9.8 feet
• Flows up to 21 gal per minute
• Pressure up to 29 psi
• Handles hard or soft solids
• Tolerates abrasive wear
• Non pulsating flow
• Handles viscosities up to 500 centiPoise
• Uses Continuously Rated Motor
• Dry running capability for 30 minutes without damage to pump

Others:

• Connections: 1½” BSP internal threaded ports
• Dimensions: 330mm long, 250mm wide, 240mm high
• Output: up to 80 litres/minute
• Built-in dry-running protection for up to 30 minutes after initial prime
• Rapid self-priming from dry up to 3m
• Will handle hard or soft solids
• Corrosion resistant bronze body, stainless steel shaft
• Carbon-ceramic mechanical shaft seal
• Simple, fully serviceable design with few wearing parts
• Continuously Rated Motor