WIHA

Pneumatic Air Tools & Equipments

pneumatic-air-tools-equipments

Air Hoses

air-hoses

Pliers

pliers

Bent Nose Pliers

bent-nose-pliers

Spanners & Sockets

spanners-sockets

Bit Holders

bit-holders

Cutters, Knives & Multitools

cutters-knives-multitools

Cable & Wire Cutters

cable-wire-cutters

Electricals

electricals

Cables & Adapters

cables-adapters

Hammers, Punches & Chisels

hammers-punches-chisels

Centre & Pin Punches

centre-pin-punches

Circlip Pliers

circlip-pliers

Combination Pliers

combination-pliers

Combination Spanners

combination-spanners

Crimping & Stripping Pilers

crimping-stripping-pilers

Cutter Blades

cutter-blades

Diagonal Pliers

diagonal-pliers

Test & Measurement

test-measurement

Distance Measurement

distance-measurement

Power Tools

power-tools

Drill Bits & Drill Bit Sets

drill-bits-drill-bit-sets

Electrical Power Testing

electrical-power-testing

Lightings

lightings

Flashlight & Lightings

flashlight-lightings

Gear Wrenches

gear-wrenches

Glue & Heat Guns

glue-heat-guns

Grip Pliers

grip-pliers

Manual Saws & Planers

manual-saws-planers

Hacksaw Blades

hacksaw-blades

Hammers & Mallets

hammers-mallets

Hex Bit Adaptor

hex-bit-adaptor

Hex Keys & Sets

hex-keys-sets

Fasteners

fasteners

Hex Nuts

hex-nuts

Impact Sockets

impact-sockets

Insulation Testers

insulation-testers

Junction & Enclosure Box

junction-enclosure-box

Locks & Iron Mongery

locks-iron-mongery

Key Cabinets & Letter Boxes

key-cabinets-letter-boxes

Knife Blade

knife-blade

Knives

knives

Other Hand Tools

other-hand-tools

L-Key & Sets

l-key-sets

Level Measurement

level-measurement

Long Nose Pliers

long-nose-pliers

Electrical Connectors

electrical-connectors

Magnetic Connectors

magnetic-connectors

Magnets & Magnetic Strips

magnets-magnetic-strips

Measuring Tapes

measuring-tapes

Multimeters

multimeters

Work-Station

work-station

Multiple Tools Sets

multiple-tools-sets

Needle Nose Pliers

needle-nose-pliers

Nipper Cutters

nipper-cutters

Screwdrivers & Screw Extractors

screwdrivers-screw-extractors

Nut Drivers

nut-drivers

Open End Spanners

open-end-spanners

Other Tools

other-tools

Pincers

pincers

Plier Sets

plier-sets

Pumps

pumps

Pumps Accessories

pumps-accessories

Punch Pliers

punch-pliers

Ratchet Screwdrivers

ratchet-screwdrivers

Ratchet Spanners

ratchet-spanners

Saw Blades

saw-blades

Wiha 00657 284 T20xT25 Sys. 6 Torx Rev.blade

Drive-Loc VI Features Adjustable/Reversible Locking Blades

Selectable Lengths from 1.7" to 4.8" in 1/8" Increments

Blades Made of High Performance CRM-72 Tool Steel

Through hardened Hard Chromed for maximum durability

Guaranteed Professional Field Service Quality Made By Wiha

<h3 class="md-block-header-three">Wiha 00657 284 T20xT25 Sys. 6 Torx Rev.blade</h3><ul class="md-block-unordered-list-item"><li>Drive-Loc VI Features Adjustable/Reversible Locking Blades</li><li>Selectable Lengths from 1.7&quot; to 4.8&quot; in 1/8&quot; Increments</li><li>Blades Made of High Performance CRM-72 Tool Steel</li><li>Through hardened Hard Chromed for maximum durability</li><li>Guaranteed Professional Field Service Quality Made By Wiha</li></ul>

<h3>Wiha 00657 284 T20xT25 Sys. 6 Torx Rev.blade</h3>
<ul>
<li>Drive-Loc VI Features Adjustable/Reversible Locking Blades</li>
<li>Selectable Lengths from 1.7" to 4.8" in 1/8" Increments</li>
<li>Blades Made of High Performance CRM-72 Tool Steel</li>
<li>Through hardened Hard Chromed for maximum durability</li>
<li>Guaranteed Professional Field Service Quality Made By Wiha</li>
</ul>
&nbsp;

Kennedy

FORCE

ELORA

Iwata

MAKITA

FLUKE

Logitech

Enerpac

Fluke Networks

IT Accessories

Screwdriver Bits & Bit Set

Screwdrivers

Ring Spanners

Sockets

Painting Tools

Ball Bearings

Stefy

wiha 00657 284 t20xt25 sys. torx rev.blade sistem. hacksaw blades pisau gergaji besi mata wiha/威哈 系统。 钢锯条 威哈

wiha-00657-284-t20xt25-sys-6-torx-rev-blade

Wiha 26795 Z341 A1101 5" Basic Bent External Circlip Pliers Shaft (10-25mm)

Design: Drop forged, cyclindrical precision tips.

Material: High quality chrome-vanadium molybdenum steel.

Application: For fitting/ removing circlips externally to/ from shafts or axles

<h3 class="md-block-header-three">Wiha 26795 Z341 A1101 5&quot; Basic Bent External Circlip Pliers Shaft (10-25mm)</h3><ul class="md-block-unordered-list-item"><li>Standards: DIN ISO 5254.</li><li>Head shape: Angled form.</li><li>Design: Drop forged, cyclindrical precision tips.</li><li>Material: High quality chrome-vanadium molybdenum steel.</li><li>Application: For fitting/ removing circlips externally to/ from shafts or axles</li></ul>

<h3>Wiha 26795 Z341 A1101 5" Basic Bent External Circlip Pliers Shaft (10-25mm)</h3>
<ul>
<li>Standards: DIN ISO 5254.</li>
<li>Head shape: Angled form.</li>
<li>Design: Drop forged, cyclindrical precision tips.</li>
<li>Material: High quality chrome-vanadium molybdenum steel.</li>
<li>Application: For fitting/ removing circlips externally to/ from shafts or axles</li>
</ul>

wiha 26795 z341 a1101 5" basic bent external circlip pliers shaft (10-25mm) poros tang penjepit eksternal bengkok dasar aci litar luar asas playar klip lengkung wiha/威哈 英寸基本型弯曲外部卡簧钳轴（10-25 毫米） 卡簧钳 威哈

wiha-26795-z341-a1101-5-basic-bent-external-circlip-pliers-shaft-10-25mm

Wiha 34708 Z990 007 01 Classic Circlip Pliers Magictips Set 4pcs

1pc Series Z 33 4 01: J1, Classic circlip pliers for inner rings (bores). With Wiha MagicTips.

1pc Series Z 33 4 01: J2, Classic circlip pliers for inner rings (bores). With Wiha MagicTips.

1pc Series Z 34 4 01: J1, Classic circlip pliers for outer rings (shafts). With Wiha MagicTips.

1pc Series Z 34 4 01: J2, Classic circlip pliers for outer rings (shafts). With Wiha MagicTips.

Design: Wiha MagicTips® - highly resilient precision tips manufactured from best ball-bearing steel. High wear resistance with additional hardening of tips. Slim plier head for optimal access and a good view of the workpiece.

Application: Set of pliers as basic set of tools for attaching retaining rings to and removing them from shafts and boreholes.

<h3 class="md-block-header-three">Wiha 34708 Z990 007 01 Classic Circlip Pliers Magictips Set 4pcs</h3><ul class="md-block-unordered-list-item"><li>1pc Series Z 33 4 01: J1, Classic circlip pliers for inner rings (bores). With Wiha MagicTips.</li><li>1pc Series Z 33 4 01: J2, Classic circlip pliers for inner rings (bores). With Wiha MagicTips.</li><li>1pc Series Z 34 4 01: J1, Classic circlip pliers for outer rings (shafts). With Wiha MagicTips.</li><li>1pc Series Z 34 4 01: J2, Classic circlip pliers for outer rings (shafts). With Wiha MagicTips.</li><li>Design: Wiha MagicTips® - highly resilient precision tips manufactured from best ball-bearing steel. High wear resistance with additional hardening of tips. Slim plier head for optimal access and a good view of the workpiece.</li><li>Application: Set of pliers as basic set of tools for attaching retaining rings to and removing them from shafts and boreholes.</li></ul>

<h3>Wiha 34708 Z990 007 01 Classic Circlip Pliers Magictips Set 4pcs</h3>
<ul>
<li>1pc Series Z 33 4 01: J1, Classic circlip pliers for inner rings (bores). With Wiha MagicTips.</li>
<li>1pc Series Z 33 4 01: J2, Classic circlip pliers for inner rings (bores). With Wiha MagicTips.</li>
<li>1pc Series Z 34 4 01: J1, Classic circlip pliers for outer rings (shafts). With Wiha MagicTips.</li>
<li>1pc Series Z 34 4 01: J2, Classic circlip pliers for outer rings (shafts). With Wiha MagicTips.</li>
<li>Design: Wiha MagicTips® - highly resilient precision tips manufactured from best ball-bearing steel. High wear resistance with additional hardening of tips. Slim plier head for optimal access and a good view of the workpiece.</li>
<li>Application: Set of pliers as basic set of tools for attaching retaining rings to and removing them from shafts and boreholes.</li>
</ul>

wiha 34708 z990 007 01 classic circlip pliers magictips set 4pcs tang penjepit klasik petua ajaib pisau lingkaran playar klip lengkung wiha/威哈 经典卡簧钳 套装 件套 卡簧钳 威哈

wiha-34708-z990-007-01-classic-circlip-pliers-magictips-set-4pcs

It's a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. The colored L-keys are also quick and easy to find and, thanks to the luminous paint, even in the dark using UV light. This means it takes less time to find lost L-keys and minimizes the risk of leaving tools inside machines when working on equipment. Thanks to the MagicRing® holding feature (from size 3) with its spring steel ring, the L-keys hold all standard hex screws firmly in any position perfectly without any magnets. The hexagonal ball end allows effortless screwing at an angle of up to 25°. The L-key set contains nine colored hex L-keys in standard sizes and can be hung up directly at the workplace using the suspension bracket on the holder.
Product dimensions
231 x 35 x 73 mm (LxWxD)
Standards
Based on ISO 2936L.
Supplementary information
MagicRing® from size 3 mm.
Application
Ideal for tightening or loosening all hex screws in hard-to-reach places, removing standard countersunk screws and inserting and screwing into horizontal, inclined or deep tapped blind holes.


1x L-keys hexagonal ball in flourescent colour 1.5 mm x 91 mm (41894)

1x L-keys hexagonal ball in flourescent colour 2.0 mm x 101 mm (41895)

1x L-keys hexagonal ball in flourescent colour 2.5 mm x 113 mm (41896)

1x L-keys hexagonal ball MagicRing® in fluorescent colour 3.0 mm x 128 mm (41973)

1x L-keys hexagonal ball MagicRing® in fluorescent colour 4.0 mm x 142 mm (41974)

1x L-keys hexagonal ball MagicRing® in fluorescent colour 5.0 mm x 163 mm (41975)

1x L-keys hexagonal ball MagicRing® in fluorescent colour 6.0 mm x 184 mm (41976)

1x L-keys hexagonal ball MagicRing® in fluorescent colour 8.0 mm x 206 mm (41977)

1x L-keys hexagonal ball MagicRing® in fluorescent colour 10.0 mm x 231 mm (41978)

Product DescriptionIt&#x27;s a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. The colored L-keys are also quick and easy to find and, thanks to the luminous paint, even in the dark using UV light. This means it takes less time to find lost L-keys and minimizes the risk of leaving tools inside machines when working on equipment. Thanks to the MagicRing® holding feature (from size 3) with its spring steel ring, the L-keys hold all standard hex screws firmly in any position perfectly without any magnets. The hexagonal ball end allows effortless screwing at an angle of up to 25°. The L-key set contains nine colored hex L-keys in standard sizes and can be hung up directly at the workplace using the suspension bracket on the holder. Product dimensions 231 x 35 x 73 mm (LxWxD) Standards Based on ISO 2936L. Supplementary information MagicRing® from size 3 mm. Application Ideal for tightening or loosening all hex screws in hard-to-reach places, removing standard countersunk screws and inserting and screwing into horizontal, inclined or deep tapped blind holes. Content:1x L-keys hexagonal ball in flourescent colour 1.5 mm x 91 mm (41894)1x L-keys hexagonal ball in flourescent colour 2.0 mm x 101 mm (41895)1x L-keys hexagonal ball in flourescent colour 2.5 mm x 113 mm (41896)1x L-keys hexagonal ball MagicRing® in fluorescent colour 3.0 mm x 128 mm (41973)1x L-keys hexagonal ball MagicRing® in fluorescent colour 4.0 mm x 142 mm (41974)1x L-keys hexagonal ball MagicRing® in fluorescent colour 5.0 mm x 163 mm (41975)1x L-keys hexagonal ball MagicRing® in fluorescent colour 6.0 mm x 184 mm (41976)1x L-keys hexagonal ball MagicRing® in fluorescent colour 8.0 mm x 206 mm (41977)1x L-keys hexagonal ball MagicRing® in fluorescent colour 10.0 mm x 231 mm (41978)1x ErgoStar holder

&nbsp;
Product Description
It's a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. The colored L-keys are also quick and easy to find and, thanks to the luminous paint, even in the dark using UV light. This means it takes less time to find lost L-keys and minimizes the risk of leaving tools inside machines when working on equipment. Thanks to the MagicRing® holding feature (from size 3) with its spring steel ring, the L-keys hold all standard hex screws firmly in any position perfectly without any magnets. The hexagonal ball end allows effortless screwing at an angle of up to 25°. The L-key set contains nine colored hex L-keys in standard sizes and can be hung up directly at the workplace using the suspension bracket on the holder. 
Product dimensions 
231 x 35 x 73 mm (LxWxD) 
Standards 
Based on ISO 2936L. 
Supplementary information 
MagicRing® from size 3 mm. 
Application 
Ideal for tightening or loosening all hex screws in hard-to-reach places, removing standard countersunk screws and inserting and screwing into horizontal, inclined or deep tapped blind holes. 

Content:
1x L-keys hexagonal ball in flourescent colour 1.5 mm x 91 mm (41894)
1x L-keys hexagonal ball in flourescent colour 2.0 mm x 101 mm (41895)
1x L-keys hexagonal ball in flourescent colour 2.5 mm x 113 mm (41896)
1x L-keys hexagonal ball MagicRing® in fluorescent colour 3.0 mm x 128 mm (41973)
1x L-keys hexagonal ball MagicRing® in fluorescent colour 4.0 mm x 142 mm (41974)
1x L-keys hexagonal ball MagicRing® in fluorescent colour 5.0 mm x 163 mm (41975)
1x L-keys hexagonal ball MagicRing® in fluorescent colour 6.0 mm x 184 mm (41976)
1x L-keys hexagonal ball MagicRing® in fluorescent colour 8.0 mm x 206 mm (41977)
1x L-keys hexagonal ball MagicRing® in fluorescent colour 10.0 mm x 231 mm (41978)
1x ErgoStar holder

Kezia Euodia

buyerIntroduction

Wiha L-KEYS 369RE9F Ergostar Coloured Magicring®

wiha l-keys 369re9f ergostar coloured magicring® l-key sets colored wiha/威哈 彩色 威哈

wiha-l-keys-369re9f-ergostar-coloured-magicring

Wiha 32337 Zp 25314 120mm 8b Smd Precision Tweezer Professional Esd

Universal Tweezers Professional ESD Version

Application: Universal tweezers for all common applications in electronics. 

<h3 class="md-block-header-three">Wiha 32337 Zp 25314 120mm 8b Smd Precision Tweezer Professional Esd</h3>Universal Tweezers Professional ESD Version<ul class="md-block-unordered-list-item"><li>Application: Universal tweezers for all common applications in electronics. </li><li>Version: smooth jaw, handle surfaces without grooves. </li><li>Glare-free black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistivity 10^6 - 10^9 ohms. </li><li>Standards: IEC 61340-5-1.</li><li>Material: special alloyed, stainless chrome-nickel steel. </li><li>Material Property: Alloy ·</li><li>Other technical data: IEC 61340-5-1, antistatic, antimagnetic, acid-resistant · Species name: ESD tweezers · Type (tweezers): AA </li><li>Tip Shape (Tweezers): Taper</li><li>Application: Universal tweezers for all common applications in electronics.</li><li>Version: smooth jaw, handle surfaces without grooves. Glare-free black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistivity 10^6 - 10^9 ohms.</li></ul>

<h3>Wiha 32337 Zp 25314 120mm 8b Smd Precision Tweezer Professional Esd</h3>
Universal Tweezers Professional ESD Version
<ul>
<li>Application: Universal tweezers for all common applications in electronics.&nbsp;</li>
<li>Version: smooth jaw, handle surfaces without grooves.&nbsp;</li>
<li>Glare-free black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistivity 10^6 - 10^9 ohms.&nbsp;</li>
<li>Standards: IEC 61340-5-1.</li>
<li>Material: special alloyed, stainless chrome-nickel steel.&nbsp;</li>
<li>Material Property: Alloy ·</li>
<li>Other technical data: IEC 61340-5-1, antistatic, antimagnetic, acid-resistant · Species name: ESD tweezers · Type (tweezers): AA&nbsp;</li>
<li>Tip Shape (Tweezers): Taper</li>
<li>Application: Universal tweezers for all common applications in electronics.</li>
<li>Version: smooth jaw, handle surfaces without grooves. Glare-free black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistivity 10^6 - 10^9 ohms.</li>
</ul>

wiha 32337 zp 25314 120mm 8b smd precision tweezer professional esd penjepit presisi profesional tweezers pinset wiha/威哈 精密镊子 专业防静电 镊子 威哈

wiha-32337-zp-25314-120mm-8b-smd-precision-tweezer-professional-esd